LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Yukon Denali >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Instrument Panel (I/P) Trim Panel Replacement - Lower >> Installation Procedure

Installation Procedure

  1. Connect all of the electrical connectors (1, 2, 3).
    Fig 1: Installing Electrical Connectors To Lower Trim Panel
    G01458147Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the bolts connecting the lower trim panel to the I/P assembly.

    Tighten 

    Tighten the bolts to 2 N.m (18 lb in).

  3. Install the center console, if equipped. Refer to CONSOLE REPLACEMENT (WITH CONSOLE MOUNTING BRACKET)  or CONSOLE REPLACEMENT (W/O CONSOLE MOUNTING BRACKET)  .
  4. Install the I/P cluster trim bezel. Refer to INSTRUMENT PANEL CLUSTER (IPC) REPLACEMENT  .
    Fig 2: Installing Bolts Retaining Lower Trim Panel To Instrument Panel Assembly
    G01458148Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals