LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Yukon Denali >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Console Replacement (with Console Mounting Bracket) >> Removal Procedure

Removal Procedure

  1. Remove both front seats. Refer to SEAT REPLACEMENT - FRONT BUCKET in Seats.
  2. If equipped with a Bose® amplifier, remove the radio amp fuse located under the hood electrical center.
  3. Remove the upper console bezel. Refer to BEZEL REPLACEMENT - FLOOR CONSOLE (NON-LUXURY UPPER)  or BEZEL REPLACEMENT - FLOOR CONSOLE (LUXURY UPPER)  or BEZEL REPLACEMENT - FLOOR CONSOLE (NON-LUX LOWER)  .
    Fig 1: Removing Console - With Console Mounting Bracket
    G01458173Courtesy of GENERAL MOTORS CORP.
  4. Remove the cupholder. Refer to CUPHOLDER REPLACEMENT (NON-LUXURY)  or CUPHOLDER REPLACEMENT (LUXURY)  or CUPHOLDER REPLACEMENT (REAR)  .
  5. Remove the screws (1) retaining the console to the I/P.
  6. Disconnect the wire connectors.
  7. Remove the console assembly from the vehicle.
  8. Remove the rear seat audio control from the console, if equipped.
scientia non olet · About LEMON Manuals