LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Yukon Denali >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Console Replacement (with Console Mounting Bracket) >> Installation Procedure

Installation Procedure

  1. Install the rear seat audio control to the console, if equipped.
  2. Install the console in the vehicle.
  3. Connect the wire connectors.
  4. Move the console forward in order to install the retaining screws.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  5. Install the 2 screws (1).

    Tighten 

    Tighten the screws to 4 N.m (35 lb in).

  6. Install the cupholder to the console. Refer to CUPHOLDER REPLACEMENT (NON-LUXURY)  or CUPHOLDER REPLACEMENT (LUXURY)  or CUPHOLDER REPLACEMENT (REAR)  .
  7. Install the upper console bezel. Refer to BEZEL REPLACEMENT - FLOOR CONSOLE (NON-LUXURY UPPER)  or BEZEL REPLACEMENT - FLOOR CONSOLE (LUXURY UPPER)  or BEZEL REPLACEMENT - FLOOR CONSOLE (NON-LUX LOWER)  .
  8. Install the radio amp fuse, if removed.
  9. Install both front seats. Refer to SEAT REPLACEMENT - FRONT BUCKET in Seats.
    Fig 1: Installing Console - With Console Mounting Bracket
    G01458174Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals