LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Yukon Denali >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Bezel Replacement - Instrument Panel (I/P) Cluster >> Installation Procedure

Installation Procedure

  1. Position the bezel to the IP assembly.
  2. Attach the bezel to the IP assembly by pushing gently on the bezel till it is in place.
  3. Ensure all clips are in place.
  4. Tilt the steering wheel to the normal drive position.
  5. If equipped with an automatic transmission, move the shift lever to the park position.
  6. Disengage the parking brake.
    Fig 1: Installing Bezel To Instrument Panel - Bezel Replacement
    G01458117Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals