LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Yukon Denali >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Accessory Power Receptacle Replacement - 12 Volt >> Removal Procedure

Removal Procedure

  1. Remove the power supply fuse.
  2. Lift up the front cover of the socket.
  3. Insert the J 42059  into the socket sleeve. Tilt the tool so that the tool fits into the slots on the sides of the socket sleeve.
    Fig 1: Inserting Cigarette Lighter Socket Removal (J 42059) Into Socket Sleeve - 12 Volt
    G01458141Courtesy of GENERAL MOTORS CORP.
  4. Hold the plastic ring in place. Pull the socket gently out of the assembly in order to remove the outlet.
    Fig 2: Holding Plastic Ring In Place To Remove Outlet - 12 Volt
    G01458142Courtesy of GENERAL MOTORS CORP.
  5. Remove the electrical connector from the socket.
    Fig 3: Removing Electrical Connector From Socket - 12 Volt
    G01458143Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals