LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Yukon Denali >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Accessory Power Receptacle Replacement - 12 Volt >> Installation Procedure

Installation Procedure

  1. Connect the electrical connector to the socket.
  2. Insert the plastic ring into the opening and snap the plastic ring into place.
  3. Insert the socket through the plastic ring gently by hand until the socket ring is sealed.
  4. Install the power supply fuse.
    Fig 1: Connecting Electrical Connector To Socket - 12 Volt
    G01458144Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals