Front Floor Console Accessory Trim Plate Replacement

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Front Floor Console Accessory Trim Plate

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the front floor console storage bin. Refer to Front Floor Console Storage Tray Replacement .
1	Front Floor Console Accessory Trim Plate Assembly Procedure Starting in the lower left corner of the accessory trim, insert a flat bladed plastic trim tool between the trim plate and the edge of the console, pull on the accessory trim outward as you slide the trim tool upward until all clips are disengaged. Repeat step 1 on the right side of the accessory trim plate. Disconnect the electrical connections. When replacing the front floor console accessory trim plate, transfer all necessary components.
2	Retainer Clip (Qty: 8)

Callout

Component Name

Preliminary Procedure:
Remove the front floor console storage bin. Refer to Front Floor Console Storage Tray Replacement .

Front Floor Console Accessory Trim Plate Assembly

Procedure

Starting in the lower left corner of the accessory trim, insert a flat bladed plastic trim tool between the trim plate and the edge of the console, pull on the accessory trim outward as you slide the trim tool upward until all clips are disengaged.
Repeat step 1 on the right side of the accessory trim plate.
Disconnect the electrical connections.
When replacing the front floor console accessory trim plate, transfer all necessary components.

Retainer Clip (Qty: 8)