LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Switch Replacement - Hot and Cold Cupholder >> Removal Procedure

Removal Procedure

  1. Remove the cupholder assembly. Refer to Cupholder Replacement (Luxury)   or  Cupholder Replacement (Non-Luxury)   or  Cupholder Replacement (Rear)   or  Cupholder Replacement (Pro)   . 
    IMPORTANT: Observe the orientation of the switches. The red lights points towards the rear of the vehicle.
  2. Disconnect the wire connectors from the 2 switches.
    • Switch 1 is the power switch.
    • Switch 2 is the hot and cold switch.
    Fig 1: Identifying Power Switch & Hot & Cold Switch
    G01579442Courtesy of GENERAL MOTORS CORP.
  3. Remove the defective switch by pushing in the retaining tabs (1) while pushing the switch outwards.
    Fig 2: Removing Defective Switch By Pushing In Retaining Tabs
    G01579443Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals