LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Switch Replacement - Hot and Cold Cupholder >> Installation Procedure

Installation Procedure

  1. Install the new switch until the tabs (1) clicks in place.

    Ensure the red light is pointing rearward of the vehicle.

    Fig 1: Installing New Switch
    G01579444Courtesy of GENERAL MOTORS CORP.
  2. Connect the electrical connectors.
  3. Install the cupholder assembly to the console. Refer to Cupholder Replacement (Luxury)   or  Cupholder Replacement (Non-Luxury)   or  Cupholder Replacement (Rear)   or  Cupholder Replacement (Pro)   . 
    Fig 2: Connecting Electrical Connectors
    G01579445Courtesy of GENERAL MOTORS CORP.