LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Knee Bolster Replacement >> Removal Procedure

Removal Procedure

  1. Remove the I/P cluster trim plate bezel. Refer to Bezel Replacement-Instrument Panel (I/P) Cluster   . 
    Fig 1: Removing I/P Cluster Trim Plate Bezel
    G01579404Courtesy of GENERAL MOTORS CORP.
  2. Remove the knee bolster screws.
  3. Unsnap the top of the knee bolster from the I/P assembly.
    Fig 2: Removing Knee Bolster Screws
    G01579405Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals