LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Knee Bolster Replacement >> Installation Procedure

Installation Procedure

  1. Snap the top of the knee bolster into the I/P assembly.
    NOTE: Refer to FASTENER NOTICE .
  2. Install the knee bolster screws.

    Tighten 

    Tighten the screws to 2 N.m (18 lb in).

  3. Install the I/P cluster trim plate bezel. Refer to Bezel Replacement-Instrument Panel (I/P) Cluster   . 
    Fig 1: Installing Knee Bolster Screws
    G01579406Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals