LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Instrument Panel (I/P) Harness Replacement >> Removal Procedure

Removal Procedure

  1. Remove the I/P carrier. Refer to Instrument Panel (I/P) Carrier Replacement   . 
  2. Remove the driver's side hinge pillar trim panel. Refer to TRIM PANEL REPLACEMENT-HINGE PILLAR .
  3. Remove the driver's side seat, if equipped with power. Refer to SEAT REPLACEMENT-FRONT BUCKET .
  4. Disconnect the electrical harness from the underhood electrical center. Refer to UNDERHOOD ELECTRICAL CENTER OR JUNCTION BLOCK REPLACEMENT .
  5. Disconnect the wire harness from the hood, if equipped with underhood camp.
  6. Remove the harness grommet from the cowl.
  7. Remove the I/P harness from the vehicle.
    8. Fig 1: Instrument Panel (I/P) Harness
    G01579508Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals