LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Instrument Panel (I/P) Harness Replacement >> Installation Procedure

Installation Procedure

  1. Install the I/P harness to the vehicle.
  2. Install the harness grommet to the cowl.
  3. Connect the wire harness to the hood, if equipped with underhood camp.
  4. Connect the electrical harness from the underhood electrical center. Refer to UNDERHOOD ELECTRICAL CENTER OR JUNCTION BLOCK REPLACEMENT .
  5. Install the driver's side seat, if equipped with power. Refer to SEAT REPLACEMENT-FRONT BUCKET .
  6. Install the driver's side hinge pillar trim panel. Refer to TRIM PANEL REPLACEMENT-HINGE PILLAR .
  7. Install the I/P carrier. Refer to Instrument Panel (I/P) Carrier Replacement   . 
    Fig 1: Instrument Panel (I/P) Harness
    G01579509Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals