LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Console Storage Bin Replacement (Pro) >> Installation Procedure

Installation Procedure

  1. Place the console bin and lid assembly over the console in order to route the electrical cord to the console bin.
  2. Install the console bin and lid assembly to the console.
    NOTE: Refer to FASTENER NOTICE .
    IMPORTANT: Ensure the rear bolts has the bigger washer.
  3. Install the 4 console bin retaining bolts (1).

    Tighten 

    Tighten the 4 bolts to 3.5 N.m (35 lb in).

    Fig 1: Installing Console Bin Retaining Bolts
    G01579478Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Ensure the longer screws is installed in the front of the console bin.
  4. Install the 6 retaining screws (1).

    Tighten 

    Tighten the 6 screws to 1.6 N.m (14 lb in)

    Fig 2: Installing Retaining Screws
    G01579479Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals