LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Center Console End Panel Replacement >> Installation Procedure

Installation Procedure

  1. Install the power outlets to the end panel, if equipped. Refer to 12-Volt Power Supply Replacement   . 
  2. Install the rear seat audio control, if equipped. Refer to AUDIO CONTROL REPLACEMENT-REAR SEAT .
  3. Install the rear seat heater switch, if equipped. Refer to HEATED SEAT SWITCH REPLACEMENT-REAR .
  4. Connect all electrical connectors.
  5. Install the end panel to the console.
    NOTE: Refer to FASTENER NOTICE .
  6. Install the 2 top retaining screws.

    Tighten 

    Tighten the screws to 1.6 N.m (14 lb in).

    Fig 1: Installing Top Retaining Screws
    G01579506Courtesy of GENERAL MOTORS CORP.
  7. Install the 2 retaining screws.

    Tighten 

    Tighten the screws to 1.6 N.m (14 lb in).

  8. Install the rear cupholder to the end panel. Refer to Cupholder Replacement (Luxury)   or Cupholder Replacement (Non-Luxury)   or Cupholder Replacement (Rear)   or Cupholder Replacement (Pro)   . 
  9. Install the storage bin. Refer to Console Storage Bin Replacement (Expect Pro)   or Console Storage Bin Replacement (Pro)   . 
    Fig 2: Installing Retaining Screws
    G01579507Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals