LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Bezel Replacement - Floor Console Extension - Upper >> Removal Procedure

Removal Procedure

  1. Remove the I/P cluster bezel. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster   . 
  2. Remove the center console four hold down retaining bolts. Refer to Console Replacement (Except PRO)   or Console Replacement (PRO)   . 

    Do not separate the console from the console extension.

  3. Remove the console extension from the I/P. Refer to Instrument Panel (I/P) Extension Replacement (PRO)   . 
  4. Remove the retainers as shown in the graphic.
  5. Lower the bezel and disconnect the electrical connectors.
  6. If replacing the bezel remove the 12 volt power supply outlets. Refer to 12-Volt Power Supply Replacement   . 
    7. Fig 1: Floor Console Extension Bezel (Upper)
    G01579480Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals