LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Accessory Switch Replacement >> Removal Procedure

Removal Procedure

  1. Remove the IP trim bezel. Refer to Bezel Replacement-Instrument Panel (I/P) Cluster  
  2. Grasp the accessory switch assembly and pull outwards to remove the button assembly.
  3. Disconnect the electrical connectors for the switches in the assembly.
  4. Remove the switches and the button assembly.
    Fig 1: Accessory Switch
    G01579398Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals