Removal Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Remove the power inverter module. Refer to Drive Motor Generator Power Inverter Module Removal and Installation

Fig 1: Range Select Cable

Courtesy of GENERAL MOTORS CORP.

Disconnect the range select cable (2) from the range select lever.
Release the range select cable retaining clip (1) and remove the cable from the range select cable bracket.

Fig 2: Range Select Lever Cable Bracket

Courtesy of GENERAL MOTORS CORP.

Remove the bolts (1) securing the range select lever cable bracket.
Remove the range select lever cable bracket (2).