LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Instrument Panel Cluster (IPC) Replacement >> Installation Procedure

Installation Procedure

  1. Connect the I/P cluster harness (1) to the I/P cluster (2).
    Fig 1: Connecting I/P Cluster Harness To I/P Cluster
    G01579423Courtesy of GENERAL MOTORS CORP.
  2. Install the I/P cluster onto the I/P with the screws. Tilt the top of the cluster into the retainer first to avoid damaging the flexible circuit connections.
    NOTE: Refer to FASTENER NOTICE .
  3. Install the screws that retain the I/P cluster to the I/P assembly.

    Tighten 

    Tighten the screws to 2 N.m (18 lb in).

  4. Install the I/P cluster trim plate bezel. Refer to Bezel Replacement-Instrument Panel (I/P) Cluster   . 
    Fig 2: Installing Screws To Retain I/P Cluster To I/P Assembly
    G01579424Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals