Removal Procedure
- Remove the lower control arm. Refer to LOWER CONTROL ARM REPLACEMENT (RWD) or LOWER CONTROL ARM REPLACEMENT (AWD) .
- Remove the front bushing.
- 2.1. Unbend the crimps using a punch.
- 2.2. Remove the bushing using the J 36618-2, the J 9519-23, the J36618-4, and the J 36618-1.
- Remove the rear bushing (no crimp). Remove the bushing using the J 36618-5, the J 36618-3, the J 36618-2, and the J 9519-23.