LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> Steering >> Steering Wheel & Steering Column >> Repair Instructions >> Shift Lever Replacement >> Installation Procedure

Installation Procedure

  1. Install the shift lever seal (2) onto the shift lever assembly (4).
    NOTE:
  2. Install the shift lever assembly (4) and secure it with the shift lever screw (3).

    Tighten 

    Tighten the screw to 22 N.m (29 lb in).

    IMPORTANT: The shift lever boot must be seated inside the trim covers.
    Fig 1: Installing Shift Lever
    G01646088Courtesy of GENERAL MOTORS CORP.
  3. Slide the shift lever boot into the trim covers.
  4. Install the steering column trim covers. Refer to STEERING COLUMN TRIM COVERS REPLACEMENT  .
scientia non olet · About LEMON Manuals