Installation Procedure
- Install the windshield defroster duct to the instrument panel.NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
- Install the retaining screw to the instrument panel carrier.
Tighten
Tighten the screw to 2 N.m (18 lb in).
- Install the windshield defroster duct retainers to the instrument panel.
- Install the windshield defroster duct grille to the instrument panel.
- Roll the instrument panel up. Refer to INSTRUMENT PANEL (I/P) CARRIER REPLACEMENT in Instrument Panel, Gages, and Console.