Disc Brakes Service Specifications
DISC BRAKES SERVICE SPECIFICATIONS
| Application |
In. (mm) |
| Front Brakes |
| Rotor Discard Thickness |
1.083 (27.50) |
| Rotor Minimum Allowable Thickness After Refinish |
1.102 (28.00) |
| Rotor Thickness - New |
1.142 (29.00) |
| Rotor Maximum Allowable Lateral Runout |
0.005 (0.13) |
| Rotor Maximum Allowable Scoring |
0.059 (1.50) |
| Rotor Maximum Allowable Thickness Variation |
0.001 (0.03) |
| Rear Brakes |
| Rotor Discard Thickness |
0.728 (18.50) |
| Rotor Minimum Allowable Thickness After Refinish |
0.748 (19.00) |
| Rotor Thickness - New |
0.787 (20.00) |
| Rotor Maximum Allowable Lateral Runout |
0.005 (0.13) |
| Rotor Maximum Allowable Scoring |
0.059 (1.50) |
| Rotor Maximum Allowable Thickness Variation |
0.001 (0.03) |