LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> General Information >> OEM General Information >> Vibration - Drivetrain >> Trouble Shooting >> Clunk Noise When Accelerating During Turns

Clunk Noise When Accelerating During Turns

  1. Check for worn or damaged outer CV joints and/or seals. Are the outer CV joints/seals worn? If so, go to next step. If not, system is okay.
  2. Replace the outer CV joints/seals. See AXLE SHAFT OUTER JOINT & SEAL under REMOVAL & INSTALLATION in appropriate AXLE SHAFTS article in DRIVELINE/AXLES. Is the repair complete? If so, system is okay.
scientia non olet · About LEMON Manuals