Vehicles with Driver Information Center (DIC)
- Turn the ignition to ON/RUN with the engine off.
- Press the DIC MENU button, on the center console or right-hand steering wheel controls, to enter the Vehicle Information Menu.
- Press either the up or down arrows to view REMAINING OIL LIFE.
- Press the SET/CLR button until 100% is displayed.
- Turn the ignition to LOCK/OFF.
The system is reset when the CHANGE ENGINE OIL SOON message goes off.
NOTE:
If the CHANGE OIL message comes back on when the vehicle is started, the engine oil life system has not been reset. Repeat the procedure.