Oil Pump, Pump Screen and Deflector Removal
WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the bolt that attaches the oil pump to the crankshaft rear bearing cap.
- Remove the oil pump, driveshaft and retainer from the crankshaft rear bearing cap.
- Separate the oil pump (422), driveshaft (420) and retainer (424).
- Discard the driveshaft retainer (424).
- Remove the crankshaft oil deflector nuts.
- Remove the crankshaft oil deflector.