LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 994 (Engine Mechanical - 6.6L (LLY)) >> Repair Instructions >> On-Vehicle Repair Instructions >> Valve Lifter Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply clean engine oil to the roller and outside of the valve lifter.
  2. Install the valve lifter.
  3. Install the valve lifter guides.
  4. Install the valve lifter guide retainer.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  5. Install the valve lifter guide retainer bolt.

    Tighten:  Tighten the bolt to 11 N.m (97 lb in).

    6. Fig 1: View Of Valve Lifter, Guides, Retainers & Bolts
    GM660517Courtesy of GENERAL MOTORS CORP.
  6. Install the cylinder head. Refer to Cylinder Head Replacement - Left  or Cylinder Head Replacement - Right .
scientia non olet · About LEMON Manuals