LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 994 (Engine Mechanical - 6.6L (LLY)) >> Repair Instructions >> On-Vehicle Repair Instructions >> Turbocharger Oil Supply Hose Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    IMPORTANT: Lubricate the NEW washer with diesel fuel before installing.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Position the oil feed pipe and a NEW washer into place.
  2. Install the oil feed pipe bolt.

    Tighten:  Tighten the bolt to 34 N.m (25 lb ft).

    3. Fig 1: View Of Oil Feed Pipe Bolt, Washer & Pipe
    GM1335581Courtesy of GENERAL MOTORS CORP.
  3. Install the turbocharger. Refer to Turbocharger Replacement .
scientia non olet · About LEMON Manuals