LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 994 (Engine Mechanical - 6.6L (LLY)) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Valve Rocker Arm, Shaft, and Push Rod Removal

Valve Rocker Arm, Shaft, and Push Rod Removal

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen the valve clearance lock nuts on each rocker arm.
  2. Loosen the valve clearance adjusting screw on each rocker arm to relieve tension on the valve train.
    3. Fig 1: View Of Valve Clearance Adjusting Screws
    GM660481Courtesy of GENERAL MOTORS CORP.
  3. Remove the rocker arm shaft assembly bolts in the proper sequence.
    4. Fig 2: Rocker Arm Shaft Assembly Bolts Removal Sequence
    GM660486Courtesy of GENERAL MOTORS CORP.
  4. Remove the rocker arm shaft assembly from the cylinder head.
  5. Remove the valve bridge pins.
  6. Remove the valve bridges.
  7. Remove the pushrods.
    8. Fig 3: View Of Pushrods, Valve Spring Caps & Valve Lifter Bridges
    GM660488Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals