Valve Rocker Arm Cover Installation - Lower Left
WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the lower valve rocker arm cover.
- Install the lower valve rocker arm cover bolts.
Tighten:
- Tighten the lower valve rocker arm cover bolts in the proper sequence to 10 N.m (89 lb in).
- Retighten the lower valve rocker arm cover bolts in the proper sequence to the same torque, 10 N.m (89 lb in).
IMPORTANT:
The gasket may be reused if it is not torn, cracked, stretched, or swollen.
NOTE:
Refer to Fastener Notice in Cautions and Notices.