Intake Manifold Removal - Left

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required

J 37228 Seal Cutter

Remove the left intake manifold bolts. Do not forget to remove the bolt inside the intake manifold tube.
Separate the intake manifold from the cylinder head using J 37228 .
Remove the left intake manifold.

Fig 1: View Of Intake Manifold (Left)

Courtesy of GENERAL MOTORS CORP.