LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 994 (Engine Mechanical - 6.6L (LLY)) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Intake Manifold Crossover Installation

Intake Manifold Crossover Installation

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the intake manifold crossover gaskets.
  2. Install the intake manifold crossover.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the intake manifold crossover nuts and bolts in sequence.

    Tighten:  Tighten the intake manifold crossover nuts and bolts to 10 N.m (89 lb in).

    4. Fig 1: View Of Center Intake Manifold
    GM1335931Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals