Exhaust Outlet Installation
WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the exhaust outlet.
- Install the exhaust outlet clamp.
Tighten: Tighten the exhaust outlet clamp to 15 N.m (11 lb ft).
- Install the exhaust outlet to right exhaust pipe bracket bolt.
Tighten: Tighten the exhaust outlet to right exhaust pipe bracket bolt to 34 N.m (25 lb ft).
- Install the exhaust outlet heat shield.
- Install the exhaust outlet heat shield bolts.
Tighten: Tighten the exhaust outlet heat shield bolts to 10 N.m (89 lb in).
NOTE:
Refer to Fastener Notice in Cautions and Notices.