LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 992 (Engine Mechanical - 4.3L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Valve Lifters and Guides Cleaning and Inspection

Valve Lifters and Guides Cleaning and Inspection

WARNING: This page is about a different car, the 2004 GMC Sierra and 2004 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Mark, sort, and organize the components for assembly.
    2. CAUTION: Refer to Safety Glasses Caution in Cautions and Notices.
  2. Clean the components in cleaning solvent.
  3. Dry the components with compressed air.
    4. Fig 1: Valve Lifters & Guides
    GM188118Courtesy of GENERAL MOTORS CORP.
  4. Inspect the valve lifter pushrod guides for excessive wear.
  5. Inspect the valve lifter pushrod guides for cracks or damage.
    6. Fig 2: Valve Lifter Pushrod Guides
    GM334500Courtesy of GENERAL MOTORS CORP.
  6. Inspect the valve lifter for the following:
    • Broken or damaged clip (1)
    • Worn pushrod socket (2)
    • Scuffed or worn lifter body (3)

      If the valve lifter shows scuffing or wear, inspect the engine block valve lifter bores for wear.

    • Worn roller (4)
    • Loose or damaged pin (5)
    • Plugged oil hole (6)
    7. Fig 3: Inspecting Areas Of Valve Lifters
    GM178485Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals