LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 992 (Engine Mechanical - 4.3L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Crankshaft and Bearings Removal

Crankshaft and Bearings Removal

WARNING: This page is about a different car, the 2004 GMC Sierra and 2004 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Mark or identify the crankshaft bearing cap locations, direction, and positions for assembly.
  2. Remove the crankshaft bearing cap bolts and discard.
  3. Remove the crankshaft bearing caps.
    4. Fig 1: Removing Crankshaft Bearing Caps
    GM334329Courtesy of GENERAL MOTORS CORP.
  4. Remove the crankshaft.
    5. Fig 2: Removing Crankshaft
    GM334336Courtesy of GENERAL MOTORS CORP.
  5. Remove the crankshaft bearings from the crankshaft bearing caps.
    6. Fig 3: Removing Crankshaft Bearings
    GM334342Courtesy of GENERAL MOTORS CORP.
  6. Remove the crankshaft bearings from the engine block.
    7. Fig 4: View Of Crankshaft Bearings At Engine Block
    GM334338Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals