LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 992 (Engine Mechanical - 4.3L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Camshaft Removal

Camshaft Removal

WARNING: This page is about a different car, the 2004 GMC Sierra and 2004 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the camshaft retainer bolts and retainer.
    2. Fig 1: View Of Camshaft Retainer & Bolts
    GM188030Courtesy of GENERAL MOTORS CORP.
    NOTE: All camshaft journals are the same diameter, so care must be used in removing or installing the camshaft to avoid damage to the camshaft bearings.
  2. Remove the engine camshaft.
    1. Install the three 5/16-18 x 4.0 inch bolts into the engine camshaft front bolt holes.
    2. Using the bolts as a handle, carefully rotate and pull the engine camshaft out of the camshaft bearings.
    3. Remove the bolts from the front of the engine camshaft.
    3. Fig 2: Installing & Removing Engine Camshaft Front Bolts
    GM5147Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals