Noisy in Drive
WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Noisy in Drive
| Checks |
Action |
| Excessive pinion to ring gear backlash |
Adjust the pinion to ring gear backlash. Refer to Backlash Inspection and Adjustment . |
| Worn pinion and ring gear |
Replace the pinion and the ring gear. Perform the following procedures:
|
| Worn pinion bearings |
Replace the pinion bearings. Perform the following procedures:
|
| Loose pinion bearings |
Adjust the pinion bearings preload. Perform the following procedures:
|
| Excessive pinion end play |
Adjust the pinion end play. Refer to Differential Carrier Assembly - Assemble . |
| Worn differential bearings |
Replace the differential bearings. Perform the following procedures:
|
| Loose differential bearings |
Adjust the differential bearing preload. Perform the following procedures:
|
| Excessive ring gear runout |
Replace the ring gear. Perform the following procedures:
|
| Low oil level |
Fill the fluid level to specifications with the proper lubricant. Refer to Lubricant Level Inspection - Front Drive Axle . |
| Wrong or poor grade oil |
Drain and refill the system with the proper lubricant. Refer to Lubricant Replacement - Front Drive Axle . |