LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 982 (Heating, Ventilation And Air Conditioning - Gas) >> Repair Instructions >> Blower Motor Resistor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. If equipped, remove the IP sound insulator. Refer toInsulator Replacement - Instrument Panel (I/P) in Instrument Panel, Gages, and Console.
    2. Fig 1: View Of Electrical Connector At The Blower Motor
    GM476821Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the electrical connection from the blower motor.
  3. Disconnect the electrical connection from the blower motor resistor.
    4. Fig 2: Blower Motor Resistor Retaining Screws
    GM382493Courtesy of GENERAL MOTORS CORP.
  4. Remove the blower motor resistor retaining screws.
    5. Fig 3: Blower Motor Resistor
    GM382503Courtesy of GENERAL MOTORS CORP.
  5. Remove the blower motor resistor.
scientia non olet · About LEMON Manuals