Removal Procedure
WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the transmission filter. Refer to Automatic Transmission Fluid/Filter Replacement .
- Remove the rear servo from the transmission case in the following order:
- Cover bolts (6)
- Cover (5)
- Cover gasket (4)
- Bottom retaining clip (3)
- Servo piston (2)
- Outer ring oil seal (1)
- Inner ring oil seal (7)
- Accumulator piston (8)
- Piston seal (9)
- Washer (10)
- Servo spring (11)
- Servo spring retainer (12)
- Selective pin (13)
- Accumulator spring (14)