LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 979 (Exterior Trim) >> Repair Instructions >> Molding Replacement - Rocker Panel (SS) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the 7 push-pins.
  2. Slide the molding upward in order to disengage the molding.
  3. Remove the molding from the vehicle.
    Fig 1: Removing Rocker Panel Molding (SS)
    GM1228443Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals