Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Open the hood.
Remove the upper grille baffle.

Fig 1: View Of Upper Grille Baffle

Courtesy of GENERAL MOTORS CORP.

Using a Phillips screw driver, rotate the grille retainer 1/4 turn counterclockwise.

Fig 2: Grille Retainer

Courtesy of GENERAL MOTORS CORP.

Remove the screw holding the grille to the latch support.

Fig 3: Removing Latch Support To Grill Screw

Courtesy of GENERAL MOTORS CORP.

Release the grille end from the fender. Remove the grille from the vehicle.

Fig 4: Grille Ends To Fender Fasteners

Courtesy of GENERAL MOTORS CORP.