Installation Procedure
WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the emblem (1) onto the grille (2).
- Install the retaining nuts (3) and tighten.
Tighten: Tighten the retaining nuts to 3 N.m (27 lb in).
- Reinstall the upper grille baffle.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.