Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, 2004 Chevrolet Cab & Chassis Silverado, and 2003 GMC Sierra. However, it is still accessible from the selected car via links, so may be relevant.

Release the park brake.
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
Relieve the tension from the park brake cable by pulling down on the park brake cable in front of the equalizer and removing the left park brake cable from the equalizer bar.

Fig 1: Equalizer Bar & Park Brake Cable - Rear

GM791349

Courtesy of GENERAL MOTORS CORP.

Remove the cable from the mounting bracket by depressing the locking tabs.

Fig 2: View of Park Brake Cable & Mounting Bracket

GM363839

Courtesy of GENERAL MOTORS CORP.

Remove the cable at the lower shock absorber mount by removing the bolt.

Fig 3: Park Brake Cable, Lower Shock Absorber Mount & Bolt - Left Rear (w/NYS)

GM791351

Courtesy of GENERAL MOTORS CORP.

Remove the rear cable mounting bracket bolt.

Fig 4: Identifying Rear Park Brake Bracket Bolt

GM791353

Courtesy of GENERAL MOTORS CORP.

Remove the cable from the lever.

Fig 5: View Of Park Brake Cable To Park Brake Actuator Lever

GM791352

Courtesy of GENERAL MOTORS CORP.

Remove the cable (2) from the rear brake cable mounting bracket (3) by depressing the locking tabs (1) on the brake cable.

Fig 6: Locking Tabs, Park Brake Cable & Rear Mounting Bracket - Left Rear (w/NYS)

GM791822

Courtesy of GENERAL MOTORS CORP.

Remove the cable from the guides and the body mounts.

Fig 7: View of Park Brake Cable & Mounting Bracket

GM363839

Courtesy of GENERAL MOTORS CORP.