Installation Procedure
WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install a new O-ring seal on the water pump outlet pipe.
- Lightly lubricate the O-ring seal with engine oil.
- Install the oil cooler inlet/water pump outlet pipe in the engine oil cooler.
- Install a NEW oil cooler inlet pipe to water pump gasket.
- Install the water pump. Refer to Water Pump Replacement (6.6L (LB7) Engine) .