Installation Procedure
WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the thermostat and thermostat housing to the water pump.
- Install the thermostat housing bolts.
Tighten: Tighten the bolts to 15 N.m (11 lb ft).
- Install the radiator outlet hose. Refer to Radiator Hose Replacement - Outlet (4.8, 5.3, and 6.0L Engines) or Radiator Hose Replacement - Outlet (W/HP2) .
NOTE:
Refer to Fastener Notice in Cautions and Notices.