Installation Procedure
WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the fan pulley spacer.
- Install the fan pulley.
- Install the fan pulley bolts/nuts.
Tighten: Tighten the bolts/nuts to 46 N.m (34 lb ft).
- Connect the CMP sensor electrical connector (1).
- Install the fan clutch. Refer to Fan Clutch Replacement .
NOTE:
Refer to Fastener Notice in Cautions and Notices.