LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 973 (Automatic Transmission - ALLISON (Introduction, Service & Replacement)) >> Repair Instructions >> Torque Converter Housing Bolt Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the torque converter from the transmission. Refer to Torque Converter Replacement .
  2. Remove any of the 10 bolts (1), bolt heads shaded, where leakage at the bolt head is suspected.
    Fig 1: Torque Converter Housing Bolts
    GM659006Courtesy of GENERAL MOTORS CORP.
    3. IMPORTANT: Bolts (1) have a removable seal under the flanged head.
  3. Remove and discard seals from bolts removed.
scientia non olet · About LEMON Manuals