Installation Procedure
WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the new PTO cover gasket (1) and cover (2).
- Start the top-center bolt (3) first. Install the other 5 bolts.
Tighten: Tighten all bolts to 43 N.m (32 lb ft).
NOTE:
Refer to Fastener Notice
in Cautions and Notices.