LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 972 (Transfer Case - NVG 263-NP1) >> Repair Instructions >> Transfer Case Shift Control Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel (IP) cluster bezel. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster in Instrument Panel, Gages, and Console.
  2. Pull the tabs on the side of the transfer case driver control switch out.
  3. Pull the transfer case driver control switch straight out from the panel.
    4. Fig 1: Removing Transfer Case Driver Control Switch
    GM396838Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals