Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra and 2004 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the right rear speed sensor.
Tighten: Tighten the speed sensor to 15 N.m (11 lb ft).

Fig 1: Installing Right Rear Speed Sensor

Courtesy of GENERAL MOTORS CORP.

Connect the right rear speed sensor electrical connector (3).

Fig 2: Identifying External Transfer Case Components

Courtesy of GENERAL MOTORS CORP.

Lower the vehicle.